motorola astro spectra flashcode decoder

The SRIB runs it's own firmware and gets a firmware update every time it's run if needed. Select the firmware CVN file for your radio, and then ensure the bootstrap code and SRIB software is selected. You will go to depot and flash radio this will bypass the iButton check. Mototools is a program that can read and write the code plug in binary format directly to the radio. This will allow you to recover it if needed. It's suggested you backup your radio with mototools in binary format and save the CPS codeplug too. Open the CPS and test that you can read and write the radio codeplug, and the flashport config. Install Unzip the firmware files and have them ready.

You cannot have the regular CPS installed with the Depot CPS, so remove that first if you need to. Install the Depot CPS, and ensure you do a custom install without the tutorials. This is reversed from all other RIB power supplies, and you must ensure you use the SRIB with a center negative supply.Īdditionally you will need a DE9M to DE9F cable to connect the radio the PC and the full test/programming cable for the radio. If you fuck this up, it will fry the SRIB. READ THIS: The SRIB requires a 9v power supply Center Negative on the DC jack. You may need to open it up to verify this. NOTE: you must ensure your SRIB is a version D or later, as this has the larger SRAM chip that support the 1 meg radios. The CPS will write the firmware to the SRIB and then the SRIB will handle writing it to the radio once the CPS puts the radio in bootstrap mode.

This is not only a level converter for TTL to serial, but contains a flash memory that will write the firmware to the radio. You will need an SRIB or Smart-Radio Interface Box. This is the laptop that just works, and it is modern enough to still 'surf the web'. As of 2021 the D620/630/820/830 are going on ebay with 32bit XP and 2-4gb of ram for 100 dollars. It’s come a long was from the previous gen or radios that used a software system key, which was easily hackable with a simple DOS program.You will need a windows XP 32 bit computer with a real serial port. They can also make daughter keys with limited functionality to give to subscribers. This allows the system admin to lock down the radio once it’s programmed. The newest generation of Motorola radios, such as the APX series utilize the iButton as an Advanced System Key in a USB dongle. As long as it was a type 3 radio(aka with a keypad).

only feature and make it like a typical HAM radio so you could directly punch in any frequency you wanted. A popular one was FPP(Front panel programming) which was a Govt.

Although, the Depot CPS which was leaked from Motorola allowed you to make any codeplug for these types of radios, with literally any function. The next generation of radios, such as the XTS-5000 used a “flash Zap” method as well as the iButton for firmware and feature upgrades. Motorola doesn’t care much about those radios as they aren’t used or compatible with modern trunked radio systems. I am not sure how that as achieved, but it would be cool to learn. The iButtons back then were hacked and people were able to flash any firmware they wanted, as well as any feature they wanted. CPS wouldn’t allow you to do these functions without same, and it would plug into a special RIB box vs the normal one for general programming. The previous generation of radios, such as the Astro Saber and XTS-3000 used the iButton solely for feature and firmware updating. Jmr: Motorola has used the iButton in some shape for many years now. Sorry for taking so long to reply, It’s been a battle updating our fleet of Radios.

Motorola astro spectra flashcode decoder